It was revised in 2003 and again in 20, bringing SATA to version three, commonly referred to as SATA III or 3.0. SATA was first introduced in 2000, replacing the aged PATA ribbon cables.
SATA generations A SATA data cable BlickPixel/PixabayĪlthough most PCs in recent years have used SATA devices, there are a few different types that are worth noting. The data cable provides the high-speed connection to the rest of the computer, transferring information back and forth as requested, while the power cable is what gives the drive the electricity to run in the first place. Where the SATA data cable is usually made up of solid plastic, which extends into a flat, single-band cable, the SATA power connector will continue from its head to multiple, thin, rounded wires of different colors.īoth cables are required for SATA devices to work, and both do different jobs. Beyond length, they can be told apart by the cables that connect to them. The former is the short, L-shaped, seven-pin connector, while the latter is the more extended 15-pin connector - the taller “L” of the two.īoth connectors are typically reversed on the drives they allow connections for, with the bases of their respective “L” shapes facing one another.
#SATA POWER PIN PC#
In other words, your PC connects through two SATA ports, one on the drive and another on the motherboard.Īlthough SATA connectors are described as a single port or connector, SATA encompasses two ports: The data connector and the power connector. Data and powerĪlthough there is a myriad of computer products that are designated as SATA devices, the reason they are called that is that they use the SATA interface. I have never ran into that before, but I guess that is Dell for you and making everything so difficult to do.That may be a little confusing so read on to learn more about SATA, and don’t forget to check out our guide to what SSDs are, as well as our guide on some of the best SSDs available today. What is the point of the TPM? Annoying as hell.
I'm giving it a few weeks to make sure it all works before I format the old HDD, but so far so good. Luckly it boots up now and all seems to work. Anyway, I ran the trouble shooting from dell (from USB) and then it scanned and fixed whatever errors it found. I think it's this annoying TPM thing that is in the bios (built in?) and everytime there was a new OS drive, it wouldn't detect the HD. Soooo, seeing that I don't want to buy a new copy of that program in 2021, I cloned the HDD with Aoemi Backupper (free).
#SATA POWER PIN INSTALL#
Side note for reference: I had originally installed w10 onto the new SSD, but then I had an old program that wouldn't install / register anymore (older QB's Premier 2007). Just to close this out, I have bought the power cable and have updated the system with a new SSD. Would this cable from amazon suffice? Link: Cable Can anyone confirm if this is the correct assumption and what cable I need? I went to microcenter, but the guy said "oh thats a Dell thing, we don't have those kinds of cables" =/ They are labeled similarly on the diagram, but they look ever so slightly different. I've just never ran across power like this for hard drives - coming from the mobo instead of the power supply.
#SATA POWER PIN FREE#
Is this an additional power port for additional SSDs/HDs? I would think it is since there are two free SATA ports at the moment (#3 and #4) and they would need power. Yellow = Not in use in my set up currently. Purple = where power is currently being taken from motherboard to power HD and DVD Rom. I looked up the instructions online and found this diagram of the mobo: THat being said, upon opening the case, I noticed there were no extra power cables coming from the power source or piggybacking another power cable. I'd like to keep both the HDD and DVD Rom functioning, but if it comes down to it I can always use the power from the DVD rom to keep the HD and SSD working. It currently has a regular HD and an DVD rom.
#SATA POWER PIN UPDATE#
I am looking to update this small office computer with an SSD.
0 kommentar(er)
